Häufig gestellte Fragen zu Whirlpools

Je größer der Whirlpool, desto mehr Strom und Strom wird benötigt. Wenn Sie auf drei oder vier Pumpen aufrüsten, rechnen Sie möglicherweise mit einer 40-Ampere-Einspeisung. Es gibt keinen 32-Ampere-Whirlpool.

32 Ampere ist die Strommenge, die benötigt wird, um einen Standard-Whirlpool zu betreiben, der über eine Heizung und mehrere gleichzeitig laufende Pumpen verfügt. Mit einem 32-Ampere-Gerät könnten Sie es drei oder vier Stunden lang verwenden, ohne dass sich Ihre Heizung ausschaltet und die Temperatur gleich bleibt.

Wir finden, dass dies eine der häufigsten Fragen zu Whirlpools ist. Die Antwort ist Für jeden Kunden unterschiedlich, je nachdem, wer es nutzen wird – ein Paar, eine Familie oder Freunde. Selbst wenn nur zwei Personen den Whirlpool nutzen, können Sie mit verschiedenen Sitzmöglichkeiten unterschiedliche Muskeln entspannen.

Eventuell benötigen Sie auch eine größere Anzahl an Liegen statt Sitzplätzen. Wir haben verschiedene Whirlpools nach Größe, ob Sie auf der Suche nach sind Whirlpools für 3 Personen, Whirlpools für 6 Personen bis hin zu Whirlpools für 8 Personen.

Um den nächstgelegenen Showroom zu finden, besuchen Sie bitte unseren Finden Sie einen Platinum Spas-Showroom Buchseite. Wir haben Platinum Spas-Ausstellungsräume in ganz Großbritannien und Europa.

Wir sind stolz auf die engen Beziehungen, die wir mit unseren Partnern aufgebaut haben, zusammen arbeiten als ein Team. Wir bieten nicht nur das Beste Produktunterstützung für Whirlpools Für unsere Partner gehen wir stets über die Erwartungen hinaus und unterstützen Sie bei Vertrieb, Marketing, Betrieb und Veranstaltungen.

Wir haben eine wachsende Zahl von Partnern in Großbritannien und Europa, die eine Reihe von Produkten vertreiben luxuriöse Whirlpools Und Schwimmspas. Um Partner zu werden, füllen Sie bitte unser Formular aus Werden Sie ein Platinum Spas-Partnerformular.

A cover that bows in the middle usually means moisture has soaked into the foam inserts:
  • Always avoid sitting or placing heavy objects on the cover.
  • Remove the inserts and flip them upside-down every few months to help them dry evenly and extend their life.
  • If the dip is severe or waterlogged, it’s time to replace the cover for better insulation and safety.

A “Flow Error” means water isn’t circulating correctly through your spa’s plumbing. Follow these steps before calling a technician:
  1. Top up the water – a low water level reduces flow and triggers the error.
  2. Clean or temporarily remove the filters – clogged filters are the #1 cause of hot-tub flow problems.
  3. Restart the spa.
  4. If the error returns, there may be an airlock, pump issue or internal blockage. At that point, schedule a service call through our After-Sales team.

Water on the cabinet or patio often looks like a leak but is usually caused by fountains or waterfalls spraying the underside of the cover:
  • Turn off the fountains using the diverter knob when the cover is on.
  • Check that the cover sits flush so splashes can’t escape.
  • Dry the skirt and monitor the area; if water stops, the spa shell isn’t leaking.

  • Optimise filtration: run just enough cycles to maintain clear water.
  • Improve insulation: upgrade to our Eco-Heat insulation package or replace an ageing cover.
  • Consider an air-source heat pump: many owners report up to 70 % energy savings (do your own research to confirm suitability).
  • Use an off-peak electricity tariff: speak to your energy provider.
  • Service regularly: a well-maintained spa heats faster and stays efficient.

Häufig gestellte Fragen zum Swim Spa

 Yes, you can install your swim spa sunk into decking, but it’s important to leave a 600 mm access gap around the entire spa. This ensures proper ventilation and allows for future maintenance. We also recommend adding a trap door or removable decking panel so technicians can reach the side access panels if needed. This setup helps maintain safe operation and extends the lifespan of your spa.

Yes, every Platinum Spas swim spa comes with a built-in drainage outlet located at the base, making water removal simple and efficient. For faster draining, especially during maintenance or water changes, we recommend using a submersible pump. This helps save time and ensures your spa is ready for refilling or servicing with ease.

Swim spa water temperature can be set up to 40°C (104°F). For swimming, the ideal temperature is around 30°C (86°F), while aquatic therapy is best between 30°C and 33°C (86–91°F). For relaxing in the therapy seats, we recommend about 37.5°C (99.5°F). In swim spas with dual temperature zones, the hot tub section can be heated separately up to 40°C for maximum comfort.

Yes, one person can comfortably sit and relax in the swim spa seat while another swims. Although there might be some splashing, it’s easy to enjoy watching or resting without disrupting the swimmer’s workout. Swim spas are designed to accommodate both activities simultaneously for a versatile wellness experience.